AeroPress Go Coffee Maker

Overview

The only travel coffee press with 3 in 1 brew technology. Smooth, Full bodied flavor without grit or bitterness. Like a French press, but better.

The AeroPress Go travel coffee maker is engineered to fuel an active lifestyle. It gives coffee lovers everything they need to conveniently brew superb coffee anywhere. Like the AeroPress Original, the AeroPress Go provides the same great taste and brews American, espresso, and cold brew style coffee that can be enjoyed as is or used in a wide range of energizing and refreshing drinks. Designed in Silicon Valley, Made in USA.

Delicious coffee anywhere: Rapidly brews smooth, pure-tasting coffee without the acidity or grit. Optimized for traveling, camping, and boating. Free yourself from hotel coffee!

Compact design, with mug included: Includes microwaveable mug and lid that doubles as a traveling case so you can brew coffee anywhere. Quick to clean and pack up.

Brew American or espresso style coffee: Brews one to three delicious cups with one press. AeroPress Go can also make cold brew coffee as well as espresso-style coffee for lattes, cappuccinos, and more.

How It Works

AeroPress uses a patented 3 in 1 brew technology that combines the flavor benefits of espresso, pour-over and french press into one compact, portable device. You get a completely unique and delicious cup of coffee, only possible with an AeroPress.

First, water is poured over the coffee, wetting and aerating the grinds, creating the signature AeroPress smoothness. Then, during the immersion process, water penetrates the coffee grinds for deeper flavor notes and a full bodied finish often found in a French Press. Finally, the magic happens - air pressure quickly pushes the brew through the coffee bed and filter, removing grit and bitter tasting oils for an espresso-like richness.

How To Use

If You Don't Own A Grinder

The AeroPress Brew

Grind: Medium

What's included: 1) Plunger, 2) Chamber, 3) Filter Cap 4) Scoop, 5) Stirrer, 6) Paper Filter, 7) Go Mug and Lid

What you’ll need to brew: AeroPress, Kettle, Mug, Pre-Ground Coffee

Prep and Clean up Time: less than 2 Minutes

1. Heat water to 185F (85C) using your kettle (if you don’t have a kettle, boiling is fine).
2. Pull Plunger (1) to separate entirely from Chamber (2).
3. Put Paper Filter (6) in Filter Cap (3) and twist Filter Cap onto Chamber.
4. Stand Chamber on the Go Mug (7) and add a little less than a full scoop (4) or 12-14 grams of store bought, medium ground coffee.
5. Shake gently to level coffee. Pour water up to #3 marked on the side of the Chamber.  You may hear some coffee dripping into your Go Mug. This is a normal part of the process.
6. Stir gently for 3 seconds. Then insert Plunger about 1/2 inch into Chamber to create a vacuum and stop the drip through.  Wait 60 seconds.
7. Begin to Press the Plunger, applying gentle constant pressure (do not push too hard) until you hear the hissing sound as the air pushes the last bit of brew through the coffee bed.
8. Remove Filter Cap and place aside. Position AeroPress over sink or garbage bin and push the Plunger the rest of the way through the chamber until you hear the Pop as the coffee bed "puck" pops out.
9. Remove Paper Filter from Filter Cap and rinse. Hold the AeroPress under fresh water and rinse the silicone plunger end and then store the AeroPress in the AeroPress Go cup.
10. Prepare yourself for the uniquely smooth, rich, full-bodied flavor of an AeroPress 3 in 1 Brew.

If You Own A Grinder

The AeroPress Brew

Grind: Medium-Fine

What's included: 1) Plunger, 2) Chamber, 3) Filter Cap 4) Scoop, 5) Stirrer, 6) Paper Filter, 7) Go Mug and Lid

What you'll need to Brew: AeroPress, Grinder, Kettle, Mug, Coffee Beans

Prep and Clean up Time: less than 2 Minutes

1. Heat water to 185F (85C) using your kettle (if you don’t have a kettle, boiling is fine).
2. Pull Plunger (1) to separate entirely from Chamber (2).
3. Put Paper Filter (6) in Filter Cap (3) and twist Filter Cap onto Chamber.
4. Stand Chamber on AeroPress Carafe (7) and add 32-36 grams or 2 heaping Scoops (4) of medium-fine ground coffee (e.g. Baratza® Encore™ Setting of 11-13).  If you are making one cup of coffee, just cut your portion in half. Baratza is a registered trademark and Encore is a trademark of Breville.
5. Shake gently to level coffee. Pour water up to #8 marked on the side of the Chamber.  For one cup, fill to the number 4. You will see some coffee drip through into the carafe. This is a normal part of the process.
6. Stir gently for 5 seconds. Then insert Plunger about 1/2 inch into Chamber to create a vacuum and stop the drip through.  Wait 30 seconds.
7. Begin to Press the Plunger, applying gentle constant pressure (do not push too hard) until you hear the hissing sound as the air pushes the last bit of brew through the coffee bed.
8. Remove Filter Cap and place aside. Position AeroPress over sink or garbage bin and push the Plunger the rest of the way through the chamber until you hear the Pop as the coffee bed "puck" pops out.
9. Remove Paper Filter from Filter Cap and rinse. Hold the AeroPress under fresh water and rinse the silicone plunger end and then store in the AeroPress Organizer Stand.  Use gentle soap every several weeks to remove oils that can cause staining over time.
10. Prepare yourself for the uniquely smooth, rich, full-bodied flavor of an AeroPress 3 in 1 Brew.